after the firs update rom- wifi+sound+touch= stop working!

hay all

i just come back from china and i got with me the Iped- i got 2 of them.. in one of them i try to update the rom- in the first i couldn’t find any rom that work every rom was given me a message that say that kernel dont support... then i find this forum and downloading a few roms that work but the big big problem in all of them:
the touch panel stop working(i need to work with a mouse)
i dont have a wifi
sound dont work...
please help me fix my pad

More info plz??As what build and vibrate y /n so on..

this is my current last install rom 3.22.11_script_HoneyComb_V9.0.0_PAM_216_by_tipstir

vibrate dont work to...

how can i find the rom that work with my pad?

I have the same problem (not touch, not wifi and not sound).
I have WTM 2.1.2_88 have proved thousand ROM and nothing.
I have tried even a Chinese forum.
Surely eliel10 the same WTM has that I.

Hey,
Is the 2.1.2_88 the orig rom version?
What are the spec of this tablet?

Yes, this the irg rom version. Spec tablet is:Chip VIA MW8505 533MHz green color LED,It does not vibrate at
start,black audio port,24 pins conector,WTM version 2.1.2_88, 256 MB, box label
say MID and green android logo.I have identified my tablet as flytouch, but I am not sure, because it does not put it in the tablet.Can you help me, wilberfish?thank you!

i have anoter one in home that in his case i stay with the original rom.. if i will pic him it will help?

Of course that would help!!! Some master from here to tell you how to make a
backup ROM original.You will need to install any app. I hope that this can help
us to regain touch y wifi.your WTM is also 2.1 .2_8? thank you eliel10

Hey,
The problem is that it dosn't vibrate = clone!
Have you tried all the 2.1.2_88 roms?
Have you tried the 2.1.2_105 mseries?

I have proved everything of 2.1.2_88 and 2.1.2_105.
(I have proved +100 ROM).
All them of tipstir, everything it of s--------, androidtablet.net,[u]t-------. etc, etc.
Already not that to do[/u]

Hi, tmtr!

You may check requirements for each ROM. I'm sorry to know that your device doesn't vibrate, that's another consideration and also the risk of it.

You can always search further information on how you could catch up on it. Your persistence, patience and your hope for your device to get working again is a plus. For few notice and assistance, please check the following:

a. microSDHC (is it still working on its best?, have I format it to FAT32 format upon flashing? does it have enough memory to function on its best?)
b. .7z (do I use Tipstir's preference on unzipping the folder? have I followed through on requirements given on flashing?)

In case, all else fail, the issue is your device doesn't match its requirement, firsthand.

Were you able to connect with your vendor? If so, try requesting for the firmware. Elsewhere, try other vendor's firmware sites.

May you embrace focus and hope on your journey. You'll get there.

as i say i have 2 pads, here is the original pad with the original rom.
if you think i can copy the rom that works to my pad i will like to do it if u know how
for now i have patience for the day its will work.. i have an hope that with this forum in the end it will work.

i was try to find the driver folder in the working pad but i dont find it...

hi eliel10 !!Please, do not drive to despair that ultimately we it will achieve that it works.
I am going to investigate for there to find information of since a copy of the ROM orginal to do. To seeing if someone who knows says something to us.
My tablets has characteristics equal that that of your photo.

Hi eliel10,I asked you, and no one knows nothing of power back up. How do you might contact
your vendor for you send the original ROM factory?

I traveled in China in the markets and I got to come across with a vendor that sells the pads.
Unfortunately I have no way to reach the vender


So all that's left is to throw the device into the trash?

No, throw the device to the rubbish! We need someone who knows the topic help us
to be able to enter the settings for the tablet and look at the folder of
driver o special driver or something like that. I am hopeful fix my tablet in you.

hi eliel 10!I have sent a PM,Tell me that such it you goes with it.

Hey,
I amlooking for an answer for you that will be easy and hopefully will solve your problems. Will get back to you soon, don't throw it away i am sure we can find the answer!

hi wilberfish,I am already enough disillusioned.
Though they do not create it I have looked for answers to my problem in many forums and nothing. I have tried mas 100 ROM.
There are many people with the same problem but nobody has the solution.
I am thrilled in that you could help your me!

Update - unfortunately when I tried to use a backup method of rom from the device that works, the result is: does not work .. The device just could not work with the backup rom.

Hi everybody .
So..it is a huge but i HAVE THE SAME APAD with the same problem.
I tried a looooot of ROMs with the same results - no roms work perfect with wifi/touchscreen and camera and volume UP/DOWN,BACK buttons. I have some folders from original ROM that i backup before upgrade:
.driver, .restore, bin, busybox, cache,data,dev,etc..but no way to working wifi/touch etc i find:(.
I was disassemble the APAD and make some photos of parts inside..WIFI (RT2070l) etc...
So eliel10 .. what about your APAD? Work properly now or not?.
Thank you for any reason and really sorry for my BAD ENGLISH:(.

This may help for some people that know how fix values in script etc.
MMA7660 - 3AXIS orientation chip (I2C bus?).
VT6113 - 10/100 ethernet (and sound?) chip.
BL850G - USB hub (5ports - i thing that this is a problem about wifi - bad number of USB/wifi port)
WM1613 - i thing that this is a touch screen controller..but may not .
and it is a problem - on another APAD is WM9715 touch screen chip controller. This chip is in EKEN M001 (on some photos)
REally sorry for my really bad English:).

So something is solved for my tablet:)
run connectBot, connect as local, type su
For Touchscreen issue type: setenv touchirq gpio5
For vol up/down keys type: setenv kpadid wms8088b_14
and edit qwerty.kl for my scancode (KeyTest.apk help for scancode)
For missing hibernation type: setenv hibernation_ui yes
For WiFi issue change: setenv wifi_powerdown and here you must try some values...look to other scriptcmd files for inspirations.
Check your values by type: getenv ..
So last issue is audio for me..trying to solve now .

Audio issue was solved! There are values that help me.
setenv amp_powerup "0xd811005c|0x4,0xd8110084|0x4,0xd81100ac&~0x4"
setenv amp_powerdown "0xd811005c|0x4,0xd8110084|0x4,0xd81100ac|0x4"

and for wifi:
setenv wifi_powerdown "0xd811005c|0x2,0xd8110084|0x2,0xd81100ac&~0x2"
setenv wifi_powerup "0xd811005c|0x2,0xd8110084|0x2,0xd81100ac|0x2"
And men..is a possible to write some script or something for run with this values? Thank you.

Remember, restart after this is required!

I HAVE THE SAME
THE SOLUTION IT IS HIER
http://androidtabletzone.the-talk.net/t1336-wmt201_88-100-rooted-setcpu-overclocking-tweaked-to-max-market-3-versions
DAWN B2
sorre for my english